Science centre

3D Model of the Science Centre building.

Model was made using Autodesk Revit and was adapted for the use in Blender. The project is uniqe, and like my all other projects it is not based on any existing building and it is made from scratch using Autodesk Revit 2020. The presented renderings were made using Blender 2.80 and Cycles rendering engine. Due to the complexity of the model and my rather slow PC the quality of the renders is rather not as good as I wanted but it is compromise between the quality and the time needed to create.

Building is designed as a concept science centre. It contains 7 levels. Two underground levels are designed as an undeground garage for the cars, the other 5 levels above the ground level are designed for the scientific and office purposes use. The centre of the building is designed as a large circular shape atrium crowned with the large transparent glass panel dome supported with the steel truss structure in the funnel shape. The bottom of the funnel is designed as a large two level fountain with the waterfalls. The exterior walls are designed as a curtain glass panels walls with aluminum framing, and are curve shaped. The roof is curve shaped with the steel supporting structure. Tha main frame/skeleton of the building is designed as a reinforced concrete structure with the reinforced concrete floor slabs and the reinforced concrete foundation slab. The elevation of the building covered with the curtain walls with the diagonal mullions are additionally decorated with the curved stripes in the shape of the waves.

If you want to help me a little by purchasing one of my cheap models, please visit one of the following site. Any tip will be appreciated
https://www.cgtrader.com/ralphiex
https://www.turbosquid.com/Search/Index.cfm?FuseAction=SEOTokenizeSearchURL&stgURlFragment=Artists/Ralphiex

Youtube channel:
https://www.youtube.com/channel/UC7V8R8wXf8pUCbITwn2gLzw

If you need any custom made model, especially building exterior or interior you may contact me via my e-mail adress: michal.szkorupa@gmail.com